Geeetech

The suggestion of soldering the processor pins worked and the Y axis is now functioning. I had purchased another Teensylu from you in case this one didn't make it, so now I have both working, except for the hot end.

Now I need assistance getting the hot end to function. I'm not getting the heater ...

I'm not sure I understand. They are in the posting. You can't miss them as they should be visible in any browser. I'll also attach them to this post.

This process is taking too long and my project is stalled out. With a day or two between replies this may take forever. I need a replacement or a ...

There are no jumpers on the microstepping pins which should provide full step (as it does on the other axes).

The soldering on the board is ok except for the microprocessor. The soldering of pins on the programming jumper side looks bad, as do some of the pins on that corner and the side nearest ...

My Teensylu Y axis is not working. I have successfully installed Sprinter, selecting motherboard as 8. X, Z and E axes are fine. I swapped motors/axes, and any axis plugged into the Y header on the Teensylu does not work. I swapped the Step Stick boards and any working board from another axis will ...