Geeetech

"Thread" == forum topic/question and all associated replies

Which stl files are for the Prusa i3 pro C with dual mk8 extruders(see link below)?
http://www.geeetech.com/unassembledgeee ... p-927.html

Are the printed parts (stl files) for the Prusa i3 pro C the same as the i3 B? I realize the dual extruder mount is already listed separately, but I do not see a listing for the other i3 C parts. If they are not the same could you please post them or send them in an email?

On another note, this ...

It appears after restarting repetier the Y-axis controls are functioning correctly. Thank you very much for your help. If I run into any more problems I will make a new thread. For tonight however, I think it's time for some sleep.

You are correct, when using the LCD the Y axis appears to be functioning properly and reading the back of the machine as y=0 the front as y=200. Are there any settings in Repetier, maybe bed front location, that would be causing problems?

When I tell the y axis to home, it now moves to the endstop and stops. when it is in the home position, against the endstop, the platform will not move in either direction. If, after homing, I disable the motors and manually move the bed to the middle of the axis, I can make the bed move until it ...

Thank you! We are finally making progress. The y-axis now homes properly; however, will no longer mover in either direction after homing until platform is manually moved off endstop.

This is the same firmware I received and uploaded to the printer hours ago. To be sure, I uploaded the latest firmware I was sent. The Y axis still moves to the frot of the machine until a crash/reset when homing rather than toward the back/endstop.

It is a white board. As far as I can tell it is this one http://www.geeetech.com/gt2560-3d-pr...ard-p-915.html

The connector type does not allow reversing the connection and I am not damaging the connector to swap pins without the appropriate tool unless geeetech will agree to provide a replacement connector and pins free of charge with a 7 buisness day max delivery time. I have worked with identical ...

Tried this test with endstop plugged into y- min then into y-max same result from each.
when homeing Y- axis via LCD or Repetier, Y axis now moves toward the front of the machine(opposite the endstop) until it crashes into it.
I edited my repetier settings to match the ones provided prior to ...