Geeetech

Can you share the other slic3r settings?

Could I get the fill settings that you use?

The ABS (white) is still de-laminating. I have tried the suggested settings but alas they make no difference. The PLA prints (yellow) are stronger which should not be the case. Any other suggestions?

That looks great I will try that later today and give you feedback. And thanks for the effort. I hope it works.

Not to sound like an ass but could you ask your colleague if those numbers worked or was he just playing around?

Thanks Mark. Have you printed ABS successfully and are those the temps you use?

My ABS parts come out looking nice but they are weaker then PLA. I am no printing .2mm with a nozzel at 250c and a bed temp of 100 with a 60mm/sec speed but the parts are still fragile. I have a honeycomb 30% fill which is the Geeetech default. Any suggestions.

Looking at the back of the LCD which plug is for the lcd and which is for the sd card. Is the left for the lcd display?

Is the delta 3d printer better than the Cartesian 3d printer. Can I use the same STL files with the delta 3d printer as with the regular 3d printer.?