Geeetech

Okay I've placed a glass plate on the bed. i've adjusted all three screws for the pressure switches. So it is fairly even on each side. I'm now having issues with the print being too close on the first layer. I can here the extrude skipping. The area on the video that is missing a layer/is patchy ...

I placed a piece of glass on top of the plate and It still had issues getting an even height on all sides after auto leveling.
Each axis of the carriage has been leveled to within a paper height from the bed. The top right corner is still too close to the bed. How do I get configure the the ...

I put a glass plate on there and the nozzle is still too close on one side mostly. How do I get that one side to be higher up after auto level? The bed is leveled on each screw on the plate and the axis arms are also level with the screws next to the rods. they are all within paper with apart. What ...

<iframe width="854" height="480" src="https://www.youtube.com/embed/XhWwp_SBlrU" frameborder="0" allowfullscreen></iframe>

Any Idea on how to fix this? The bed is level on all 3 sides . The nozzle is at the correct height in the center of the bed. But it seems as though the plate is warped.