Geeetech

My name is Adam Becher and I am interested in testing the Mecreator 2 printer from Geeetech.

I currently own and built your Prusa i3 C Dual Extruder printer, I love the dual extruder capability’s and have a huge passion for 3d printing. I have used the i3 printer to start my own 3D printing ...

I have a prusa I3 pro C what firmware should I be using thanks for the help

Adam

Do you want a screen shot of the m119 command when the printer is homed or when the x y and z axis are not touching the end stops?

Thank you I will. What is weird is the y stop works when i am homing the axis just not right after the print us cancled.

thank you for the gcode but it did the same thing as always :(

another thing to note after I attempt a print and realize it isnt working I hit either emergency stop or kill print then the printer goes home. When this happens the x and z home just fine but the y axis just goes to the end stop and ...

The first link ai have tried and it didnt change anything the second one I have not so I will and let you know me results. In the mean time do you have anything else I try? Before I print I can manually control each axis and when I tell the y axis to move away from home, at 0, 100mm it does and is ...

Sorry for the confusion, I mean that it prints at the very edge of the bed so it cant move any further in the y direction. All my end stops are set in the printer settings to 0. Is that what you mean by their status? When I send the m119 command to the printer it will register them as triggered or ...

I have a dual extruder i3 printer from geeetech and when I go to print the location on the computer and the location on the actual print bed do not correspond. The y axis is printing at the top of the bed and it is not able to print anything other than a small line without hitting the y endstop ...