hello,
not is not the thermistors like mentioned in the description. they are both 100kohm check them at connector so also the wires are not short.
I was wondering what the values should be on the heat end on the input pins on the melzi board, unconnected to the thermistor with power off so i can ...
Search found 2 matches
- Fri Aug 05, 2016 9:45 am
- Forum: Extruder
- Topic: I3 Prusa geetech HOT END faulty temperature readings
- Replies: 3
- Views: 6195
- Fri Aug 05, 2016 6:23 am
- Forum: Extruder
- Topic: I3 Prusa geetech HOT END faulty temperature readings
- Replies: 3
- Views: 6195
I3 Prusa geetech HOT END faulty temperature readings
Hello all,
I have a Prusa I3 printer with Melzi 2.0 board.
I had some issues with the heater cartridge I took it out for cleaning once and I broke the thermistor or so. Since then I had this DEF error both on HEAT BED and HEAT END .
I now have replaced the thermistor with a 100Kohm one and when ...
I have a Prusa I3 printer with Melzi 2.0 board.
I had some issues with the heater cartridge I took it out for cleaning once and I broke the thermistor or so. Since then I had this DEF error both on HEAT BED and HEAT END .
I now have replaced the thermistor with a 100Kohm one and when ...