Geeetech

In Cura 2.3.0 there is no choice of com-port for the printer and the printer doesn't work.
In Cura 15.04.6 (the old version) there is a choice of com-port for the printer and the printer works with this version if to expose port in the manual.

I am interested in the Cura 2.3.0 version
Someone has ...

Hello

I would like to connect MeCreator 2 with the software Cura 2.3.0.
Cura 2.3.0 does not see printer and writes: Need connect to a printer.

Additional information:
Other software such like Repietier-Host or MatterControl combine with printer perfectly.

Does Cura with MeCreator 2 function ...

Thanks for council.

In the instruction to the printer it is worth about Slic3r.
I will try also other slicing software to check a difference.

I will write about result here.

Thanks for a detailed explanation.

Unfortunately, it doesn't solve my problem.
For the printer with the permission 0.05mm on XY axis an error in 0.2 mm on internal sides it somehow is a bit too much. I it consider had to be considered when developing the printer...

I looked at Slic3r a ...

Willian, thanks for tips:

It was really a mechanical problem.

Troubleshooting was:
I took off all belts, I greased all moving parts, I put on belts back with a smaller stretch.

Now the circle is symmetrical and round, but the Diameter is not right.

I to pressure a Kube with a hole in the middle ...

thank's for the tipps:

>> 1. Upload the firmware again.
The displayed objects are already printed with the last firmware version.
>> 2. Check if the timings belt of X axis and Y axis are too tight to move difficultly.
I have checked. The timing strap of X axes and Y easily moves, without problem ...

Hello,

I need help. I am new in the 3D world.
I bought "MeCreator 2" printer.

When I print the circle, print the printer the oval (the axis X Y).

1. Is it adjustable or is the hardware issue?

2. How can I set my printer (the axis X Y)?

Thank you in advance.

best regards
Alexander

P.S.: Thanks ...