Geeetech

Hi All,

my Pro B clogged so i bought an E3D chinese ( https://www.amazon.com/gp/product/B01ESTJUL8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 ), set it up and the thermistor ( NTC3950 Thermistor ) gives me an error max temp.

So i decided to try every settings on the firmware to find the right one ...

What is the recommended Voltage / Stepping for the motor ?

I have a 2017 Geeetech Pro B.
I have had a load of problems, but one i have not solved yet is my Extrusion motor (the mk8) is clicking and seems to be missing steps, also i have a VERY hard time removing the filament every time.

Clicing and missing steps > I am aware i should try to tweak the ...

Thanks a lot for your tests, are you able to share your settings ?

anyone having good settings for Cura 2.4 ?

I have just purchased the same model and was about to post a similar experience.
My right z axis was having a lot more resistance than the left one, resulting in jamming the right one.

I found a semi-solution, i have done 2 things :
1. changed the top piece that holds the 2 bars so that it only ...

i don't get any good results with this settings, so if anyone would be kind enough to share their Cura 2.3 - 2.4 settings it would be great

i have used Prusa i3 Mk2 and changed some settings like bed size and nozzle to 0.3 and it worked.
Anyone using another setting ?

Look here : http://www.thingiverse.com/search?q=Geeetech+Prusa+I3+Pro+B+fan&sa=
and that's just for this model and see how many people printed them, i am feeling a bit stupid to be the only one asking these questions, for instance, how did he wire that thing >
http://www.thingiverse.com/thing:1730231

Thanks a lot for the answer !
The problem with this cable is its 3 pin and most fans are 2 pins.

It feels like so many people add extra fan, are they all soldering wires and adding power splitters ?