Geeetech

Hi All.

I have a geeetach A10,
My layers is not bonding properly after upgradeing to V6 all metal hot end.
I did check my Esteps and Tried different temps also did a PID tune which makes my temp stable at 205.
But still no luck.
I know for a fact that I am not under extruding (I did replace my ...

Hi Please help as I have broken off my cooling fan outlet and I can't find the same one to 3d print.

Can someone please help me or share the stl so that I can reprint?

I also need to attach a Sensor.

I need the Config.h File of my I3 M201 printer.

Any help would be appreciated.

Great stuff.

SO I know that the board has a over heat cut off and now the past few weeks my prints just stops extruding on E0 (One closer to the Heated linear stabilizer) and sometimes on E2. Will this sort the problem out?

The issue I am having is that my extruders just stops extruding filament ...

How Do I convert the hex file to bin file?

[quote=William post_id=82269 time=1516861039 user_id=51382]

You can burn the bootloader at first and then uploading the firmware via the Easyprint 1.1.7
[/quote]

Awesome Thank you.

Last Night I did come right at the End.
Here was the issue.

I used "Flash Loader Demonstrator" to update boot ...

Hi

Hope you can Help.
I have the I3 M201 with the GTM32 Pro VB board.
I tried doing the firmware update but now I am getting a blank screen and nothing is working
It does not boot up at all.

What I did was I used "Flashed loader demonstrator" to burn the bootloader and then firmware GTM32_V1.0.5 ...