Geeetech

Thanks, I'll try. I should learn to use it well, the last time I printed badly, I probably set the profile of the printer badly.
I was hoping someone would solve it with Cura.

It's been days since I've printed and I've been able to understand various settings ... apart from a problem I just do not understand! When I print tall objects, the nozzle touches the print making ugly noises and ends up detaching the print itself from the plane.
I set the option Z-HOP to Cura to ...

Yes!
I disassembled the plate by unscrewing the two screws in front of and behind it. at the back of the printer there is a tie-rod (a screw) of the belt, I loosened it, I pulled the belt and I tightened the screw well. when reassembling the plate, make sure that the black pin underneath the plate ...

Could you paste the link on how to set up the connection of the E180 mini with care to print directly? I can not find it. Thank you! =)

I solved the plate and tightening the axis belt =)

Same problem .... the plate in fact seems to do as a "shot" to the right or left when I remove the residues of printing. I will check.

I have to try using MotorController. They also advised me to use Repetier (I can not use it but I'll learn ...).

The printer is new (mold for a week), but yesterday looking at the arm Z X seemed slightly wrong. Tonight I will take some pictures.

So, trying to print the objects to test the printer a little, but the result of the circles is this is not at all nice. They are deformed (ovalized), and even the square objects are slightly elongated

[attachment=0]WIN_20180527_16_54_13_Pro.jpg[/attachment]

unfortunately I can not understand ...

Hi
I have a similar problem, I can connect the printer to Easyprint 3d but I can not connect it to Cura.
Do I have to install any drivers? if yes where can I find it?
I tried to look but I did not find anything. :-(
Thanks!

I'm new and quite (very xD) inexperienced by 3d printers.
I have for a couple of days the E180 Mini that I managed to miraculously connect it in wifi.
Now I would like to know kindly if you can print directly from Cura.

P.S. I have already connected the printer to EasyPrint 3d and updated.