Geeetech

I set in the pins.h file TEMP_0_PIN to 9 (was 11 before), TEMP_1_PIN to 8 (was 9 before) and TEMP_2_PIN to 11 (just for my reference, was -1 before). Then wired the thermistor to the second input (= pin 9) and now everything works well again.

Hi!
I own a MECREATOR2 which worked well for a while.
Now the nozzle temperature is measured wrong. The LCD displays 108 degrees at room temperature.

I checked the thermistor - near 100k at room temperature - ok
Disconnected thermistor - LCD shows 107 degrees
Shorted the thermistor input pins ...