Hej,
I adjusted the Firmware Settings, now everything is working fine. Thank you!
Search found 6 matches
- Wed Sep 11, 2019 5:42 pm
- Forum: Geeetech I3 Pro W
- Topic: Z axis too high with 3D Touch
- Replies: 6
- Views: 9869
- Tue Sep 10, 2019 1:10 am
- Forum: Geeetech I3 Pro W
- Topic: Z axis too high with 3D Touch
- Replies: 6
- Views: 9869
Re: Z axis too high with 3D Touch
Hej,
that helped a lot, setting min_software_endstops to false was good. But now the Z axis during bed levelling is going in wrong direction in the first Corner. It is just going up a but so that the probe cannot touch the bed, then it goes in the second Corner and from that Point on it is doing it ...
that helped a lot, setting min_software_endstops to false was good. But now the Z axis during bed levelling is going in wrong direction in the first Corner. It is just going up a but so that the probe cannot touch the bed, then it goes in the second Corner and from that Point on it is doing it ...
- Mon Sep 09, 2019 4:03 pm
- Forum: Geeetech I3 Pro W
- Topic: Z axis too high with 3D Touch
- Replies: 6
- Views: 9869
Re: Z axis too high with 3D Touch
Hej,
thank you for the hint. I tried to calibrate like mentionend in the wiki with
M851 ; note the number
M851 Z0 ; set the offset to zero
G28
G1 Z0
The LCD display should show Z = 0
From the display go to the Menu then Prepare/Move axis/0.1mm/Move Z
Now move the Z axis slowly down until ...
thank you for the hint. I tried to calibrate like mentionend in the wiki with
M851 ; note the number
M851 Z0 ; set the offset to zero
G28
G1 Z0
The LCD display should show Z = 0
From the display go to the Menu then Prepare/Move axis/0.1mm/Move Z
Now move the Z axis slowly down until ...
- Sun Sep 08, 2019 7:29 pm
- Forum: Geeetech I3 Pro W
- Topic: Z axis too high with 3D Touch
- Replies: 6
- Views: 9869
Z axis too high with 3D Touch
Hej,
I just installed the 3D Touch on My I3 Pro W with selve printed mount from instruction, installed the Firmware from this Forum for this and added Code G29 in Cura for My prints. I can see that the Printer is doing the autolevelling, but the result in Z axis is just a few Millimeter too high ...
I just installed the 3D Touch on My I3 Pro W with selve printed mount from instruction, installed the Firmware from this Forum for this and added Code G29 in Cura for My prints. I can see that the Printer is doing the autolevelling, but the result in Z axis is just a few Millimeter too high ...
- Sat Dec 29, 2018 3:03 pm
- Forum: Software
- Topic: Easyprint software for WINDOWS
- Replies: 44
- Views: 3379272
Re: Easyprint software for WINDOWS
I solved it by manually downloading and installing Visual C++ Redistributable 2015 (X86 + X64) from Microsofts website and reinstalling EasyPrint. Installing C++ via EasyPrint installer did not work for me and on my machine was only version 2017 instead of 2015.
- Fri Dec 28, 2018 12:51 am
- Forum: Software
- Topic: Easyprint software for WINDOWS
- Replies: 44
- Views: 3379272
Re: Easyprint software for WINDOWS
Hi all,
i have just installed Easyprint 1.2.6 to on a laptop with win 10 Enterprise
easyprint-1.png
When I load an stl model and press the button Slicer the program complains with this message:
easyprint-2.png
Any idea how to fix this error?
Best regards.
I have the same Problem (win 10 ...