Geeetech

I try now everything. Display still black.
I build this out. The name written on the board ist Smartto_LCD 3.2'' VER2.1 FRA.1.6mm 2019-09-05.

It looks different to the pictures in the Internet. Is this maybe the problem, that the LCD-Software did not work with this Display?

regards
CaHZo

I try it - not working.

But now I hear 2 times a "beep" when switch on and also when smartoo wants to update the LCD.

Which software should be on the main-board? A30_VD_S_V1_58.bin?
and LCD A30_M_LCD_V1_37.bin?

Hi,
the display shows nothing - like switched off.(...but the LED from LCD are on....)

I try also http://www.geeetech.com/forum/viewtopic.php?f=65&t=60740
But after doing this and check the sd-card again the bin-file and the config.txt are gone from the sd-card. They are deleted from display after ...

Hi together,

I have a problem with my A30 printer, after I wanted to update (with EasyPrint3D) the firmware the display is dark.
I tried all descripted things - but nothing happened. http://www.geeetech.com/forum/viewtopic.php?f=20&t=68694

In my Geeetech A30 there were no sd-card in the display ...