Geeetech

The guys are very indignant, as they go on sale, I had a dump of drivers, the printer was overloaded and buggy and everything turned out to be garazdo more interesting, the power capacitor in the power supply 400V 100Uf, the foot of the plus touched the minus contact. It turns out that periodically ...

Found out the problem, the printer makes 10 reboots every second, respectively reconnects and then does not respond. Who has faced such a problem? tried to ReWire the printer itself the problem does not go away.

Good afternoon. faced with such a problem, you install the drivers all normal. go to the program and connect to the printer. As soon as you send it to the original or start working, everything falls off the printer and begins to reconnect, the firewood goes to the wrong place and the driver address ...

William wrote: Thu Apr 23, 2020 9:32 am Hi，it is recommended that you use other slicing software such as Repetier-Host or cura.

It seems like through Slic3r it turned out to achieve normal slicing. Small models printed perfectly, I check on the large one.

William wrote: Wed Apr 22, 2020 9:24 am Maybe you need to download the corresponding configuration file.

Those that go by the standard with the program do not work as expected??

Hi，my friend.
Can you provide the model and picture?


I don't know how screenshots will help you find the problem, but here)) Maybe the problem is a lack of Windows components to work with the program?? https://yadi.sk/i/v4p-sZBcLMgzVQ https://yadi.sk/i/5ahZxSdUHzqKHg https://yadi.sk/i ...

William wrote: Mon Apr 20, 2020 5:13 pm Hi，my friend.
Can you provide the model and picture?

Tried with different models as created by mnob, and downloaded from the Internet, as well as standard 2 pieces that give also does not convert. despite the fact that I translated and printed my model until I upgraded to the new version.

Good afternoon, inserting a model with the .stl extension
, I click the slicer button processing begins and the program closes in seconds, despite the fact that in version 1.0.17 everything was fine and in the new 1.2.6 it turns out like this. How to fix this problem?