Geeetech

Probaly, but when it turn the power on, nothing happens, and the lcd screen gets turned on, when I connect it with an laptop, but then I cant controll anything.

So sth. must be broken

While I tried to get out the Throat Tube a schort circuted two wired of the hotend and it burned. Nothing really happend, but now I gotta get a new Hotend.
Any recommendentations?
And I probally also need a new fan, also any recommendations?

Best regard

Edit: It seems like I destroyed it

Thank you for your Config File.

I did some testing and it didnt really worked.
Because of the Retraction the Filament gets pulled longer in the Throat Tube and the extruder beginns to skip an click.

Should I maybe get an better throat tube with an better heat break. rigth now I have some off ...

Okay, thank you for the information.

I just did some testing and it still doesn´t really works.
It would be really nice, if you could send me your settings in Slic3r of the Print,Filament and Printer.

Best regards.

Thank you, but it didn´t worked.

I tested today to slice and print it with Repetier Host(Slic3r) and the preset file that you can download.
With that settings I can retract, so it doesnt jam up.
I will try to get it work with Slice3r, but I would prefer Cura.
Do I have to change some other settings ...

I print at 195 degrees celcius and use the grey Pla of geeetech.
My Layer Higth is 0.2mm and I print at 40 mm/s.
And I doesnt have any fan for the hotend, as it also wasnt with the printer.
The PFTE Tube is new and they are tigth together.

Hello there,

I have an Geetech i3 Pro B 3D Printer and I can´t retract.
I use Cura as an Slicer Software and even when I use 1mm retraction distance it jams and the filament is bigger at the end.
I have tried plenty of things, bit nothing helps.
Even the recommended settings(3mm at 40mm/s) doesnt ...