My All Aluminum Prusa I3 A Pro will not recognize an SD card

[iamdbain]

I have received my printer and it went together with hardly any problems. Just a few missing screws which I bought locally and got back to finish it on time. Everything is working, all the axes work fine, the extruder works, heat bed and extruder hot end get to 200 degrees and 60 degrees with no problem. My only problem is the controller will not recognize the presence of an SD card. I put two different files on the card one .gcode and one .stl (found out the .stl will not work but the .gcode file from cura should work. The display keeps saying SD Card inserted. But when I scroll to the SD card on the menu it says no SD card everytime I try. I tried loading different .gcode models but still the menu says NO SD Card. Any ideas?

[William]

I have received my printer and it went together with hardly any problems. Just a few missing screws which I bought locally and got back to finish it on time. Everything is working, all the axes work fine, the extruder works, heat bed and extruder hot end get to 200 degrees and 60 degrees with no problem. My only problem is the controller will not recognize the presence of an SD card. I put two different files on the card one .gcode and one .stl (found out the .stl will not work but the .gcode file from cura should work. The display keeps saying SD Cared inserted. But when I scroll to the SD card on the menu it says no SD card everytime I try. I tried loading different .gcode models but still the menu says NO SD Card. Any ideas?

Hi,
Try uploading the firmware again or another SD card to see how it goes.

[iamdbain]

I bought a new SD card and it worked perfectly, thank you for your help.