Hi,
They are problems extruder, axis, distance from the plate or firmware.
I can not understand what it is, the distance from the plate is correct but when I print it's so.
https://www.youtube.com/watch?v=kSw1lox ... e=youtu.be
https://www.youtube.com/watch?v=0Tigqso ... e=youtu.be
mysterious Problem
Re: mysterious Problem
Hi,after watching these videos,I found that the distance between the extruder and the hot bed is too big which it's supposed to be a A4 paper's distance and you need to leveling it again.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: mysterious Problem
Hi,
already leveled several times during the press is going so high.
I have tried reinstalling the firmware and may be configured as the printed date yet makes the same joke.
https://www.youtube.com/watch?v=czkzuiy0sY8
already leveled several times during the press is going so high.
I have tried reinstalling the firmware and may be configured as the printed date yet makes the same joke.
https://www.youtube.com/watch?v=czkzuiy0sY8