Hello, can anyone help with finding 5v pins and GND
I would like to connect a relay of 5v to the GT2560
Can i use one vacant endstop? are they 5v?
Thank you
GT2560 5v pins and GND
Re: GT2560 5v pins and GND
Hi,here is the position of 5V and GND.
- 1.png (1.05 MiB) Viewed 8427 times
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
PauloSilva
- Posts: 10
- Joined: Sat Feb 25, 2017 11:30 pm
Re: GT2560 5v pins and GND
Is that a 5V PIN? what is the number of the PIN?
thank you
thank you
Re: GT2560 5v pins and GND
You can use the rest endstop pin of the board.There are actually 3 pins on the postition of endstop connector .Remove one of the connector from the board and replace it with a 3pin straight Pin.You need to use soldering iron here.Then you can use the +5V pin.
- 2.png (693.92 KiB) Viewed 8416 times
- 1.png (658.66 KiB) Viewed 8416 times
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!