Page 1 of 1

STL file for Geeetech prusa 3

Posted: Mon Feb 16, 2015 4:24 am
by carmelo42
Hello,

I have just finished my Geeetech Prusa I3, and it's working fine ! :)

But I want to print the 4 plastic parts of the printer (the 2 for Z axes and the 2 for the extruder).

Please provide this pieces files so I'll be able to print them in case of break (one is a little broken already)

My mail : carmelo42 AT gmail DOT com


Thanks :)

Carmelo

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 6:59 am
by thegman
I have the same printer and would also like to receive all the STL files to print as a backup.

I also have an issue with one of the pieces I got being cracked.

Thanks.

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 8:53 am
by Admin
STL files are in the zip file.

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 9:10 am
by thegman
Thanks, what setting do you recommend these get printed at?

material, layer height, % fill, type of fill, etc.

Can you send a slic3r configuration? That may be easier.

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 9:20 am
by Admin
It depends on what material you use. ABS or PLA or else?

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 12:28 pm
by thegman
Which would be better to use? What do you guys use? I would use the same material with the same slic3r configuration.

Re: STL file for Geeetech prusa 3

Posted: Tue Feb 17, 2015 1:52 pm
by Admin
Mainly, they are different in temperature setting.