Geeetech

Hi,
I am using I3 pro c printer.he main board is GT2560.My PSU stopped working.So I want to replace PSU.Please let me know Which PSU I have to use? also clear my doubts.
1. There are 4 wire connect to Main-board from PSU.Two wire positive and Two wire negative . what output voltage should be there in both?
2.also please check bellow link please let me know is it okay if replace?

http://www.ebay.in/itm/12V-20A-DC-Power ... 1902648419

Thanks
Shiva

shiva wrote:Hi,
I am using I3 pro c printer.he main board is GT2560.My PSU stopped working.So I want to replace PSU.Please let me know Which PSU I have to use? also clear my doubts.
1. There are 4 wire connect to Main-board from PSU.Two wire positive and Two wire negative . what output voltage should be there in both?
2.also please check bellow link please let me know is it okay if replace?

http://www.ebay.in/itm/12V-20A-DC-Power ... 1902648419

Thanks
Shiva

Hi,Shiva
The DC output should be 12V in both.
About the specifications you can refer to this:
http://www.geeetech.com/s25012-12v-20a- ... p-966.html

So in each terminal should have 12volt 20a current?

Also I have one more question,I want update MKS TFT32 Lcd screen to my I3 pro c.This lcd have poweroff resume option,Gt2560 mainboard support it?

shiva wrote:So in each terminal should have 12volt 20a current?

Yes,the two should be 12V.

shiva wrote:Also I have one more question,I want update MKS TFT32 Lcd screen to my I3 pro c.This lcd have poweroff resume option,Gt2560 mainboard support it?

Sorry,i'm not sure what type your LCD is,but i think there should be some tutorial in your LCD manual.Here is the LCDs Marlin supports: