Page 1 of 1
PRO C extruders
Posted: Sun Oct 08, 2017 11:02 am
by Cold
Both extruder stepper motors are turning the wrong direction
Re: PRO C extruders
Posted: Mon Oct 09, 2017 10:15 am
by William
1. You can upload the firmware.
viewtopic.php?f=10&t=17046
2. If the uploading cannot solve that, you need to modify the direction of Extruder in Marlin firmware.
viewtopic.php?f=17&t=17037
Re: PRO C extruders
Posted: Sat Oct 21, 2017 9:16 am
by Cold
Thank You William everything is working but the extruders are still turning backwards in prepare mode they work but I run them - negative I ordered some stuff from geeetech have not gotten a emails cant see that I ordered anything order # 20171007202513187 I paid paypal Thank You for all of your help I am almost there
Re: PRO C extruders
Posted: Sat Oct 21, 2017 5:32 pm
by William
You'd better contact the seller to ask the shipping information.
Re: PRO C extruders
Posted: Sun Oct 22, 2017 1:14 am
by Cold
Geeetech is the seller it said to post on the forum if I had questions
Re: PRO C extruders
Posted: Mon Oct 23, 2017 9:08 am
by William
I think the question should be technical. But for shipping, the seller should be clear.
Re: PRO C extruders
Posted: Thu Jan 04, 2018 6:41 pm
by gujaratpackers
thanks for this information.