E180 hotend intermittently working
Posted: Thu Mar 07, 2019 7:34 am
The hotend on my E180 is only working intermittently.
Is this a firmware or controller board issue.
I am also considering to replace the hotend with V6 Extruder Hotend 1.75mm and the originals fail to often, I'm on about the 4th.
Also can I replace the controller board with something like a GT2560 board, if so what about the LEd screen and the leveling functions
Is this a firmware or controller board issue.
I am also considering to replace the hotend with V6 Extruder Hotend 1.75mm and the originals fail to often, I'm on about the 4th.
Also can I replace the controller board with something like a GT2560 board, if so what about the LEd screen and the leveling functions