X axis not responding
X axis not responding
I have a Geeetech I3 Pro W with the gt 2560 A+ board and when I recently put together my printer I noticed that my x-axis stepper motor has no response or power going to it. I attempted to flash the newest version of the firmware to the board using the tutorial included with no results. Pretty desperate now as I emailed Geeetech with no response for about 4 or so days. Any help would be appreciated, thanks. best auto clicker
Re: X axis not responding
Hi!
You can try to swap the X-axis driver with the Y or Z-axis driver, and test it again. It may be a driver failure, you can replace the driver.
You can try to swap the X-axis driver with the Y or Z-axis driver, and test it again. It may be a driver failure, you can replace the driver.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!