Page 1 of 1
Voice Recognition module not working
Posted: Sat Aug 22, 2020 8:15 pm
by RyanBegg
I have recently purchased the Geeetech Voice recognition module , but i have encountered a problem now. The red light is no longer blink but remains on. The orange light is also on and not blinking. I also can not send or receive data from the module. Can you please advise me on what to do or how to reset the module?
Re: Voice Recognition module not working
Posted: Mon Aug 24, 2020 11:13 am
by William
Hi,
1. Please make sure to set the serial port baud rate (the default is 9600bps), and to record the sound correctly.
2. Select the serial port receiving method: Common mode or Compact mode.
3. Ensure the correct wiring method.
Re: Voice Recognition module not working
Posted: Mon Aug 24, 2020 3:01 pm
by RyanBegg
I have connected correctly, as i had it working prior to it not working.
As shown in the image attached, both the red and orange line remain illuminated at all times? i am unsure on what this means?
The software on my computer indicates that data is not sent and received from the module?
Any help will be great.