Geeetech

The code:
#ifndef CONFIGURATION_H
#define CONFIGURATION_H

// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration ...

The sensor works from 6v to 36v.
It is supplied with 12v and the signal is reduced with a tension divider with two resistors 15 ohms and 10 ohms

I am wiht problem to wire gen6 board with inductive sensor at Z axis to a auto leveling system.
The sensor output is 5,8V and 0,7v when triggered.