Geeetech

we tested today, and the highest voltage we could get on the stepper drivers was 1.013 and we think this is not high enough, should at least be 1.2 or maby 1.3..
Are there any better stepper drivers that can give higher voltage?

can i use i.e. 8825 on x, y and z axis and 4988 on extruders?

Hi again, what should the voltage be on the stepper drivers?
I used a voltmeter and i read this from them?

the black to ground, and the red to the adjustment knob on the driver.
what is the correct voltage on them?
https://www.dropbox.com/s/04ccvz7hixn7qm4/2016-04-01%2000.37.03.jpg?dl=0


https ...

Ok, i extruded filament1 with the 10 in the software, but it moved 9mm inside the plastic tube, I guess i have to set a higher value on extruder steps to compesate this? correct?

btw.. there is an option in the software to adjust number of steps pr mm on extruders, are there a default settings for this?

i have abs and use 1.75 thikness with a nozzle with 0.2mm hole

Perfect, now x works fine.. thank you

Hi, i have an m201 where the x axxis is not moving when i use the auto home in the menu, z and y axxis are moving, but if i go in motion and move the x manually it moves, and i can move x from the repetier software. and if i turn all off, move it to the 0 point (front to the left) and then tries to ...

thank you

Hi, i have big problems with the slicer settings.. can anyone help me a step further?

my filement is 1,75mm ABS-B
my nozzle is 0,2 and i have the m201 with two extruders printer.
I have loaded a print into repetier, and set the temperature to 240 for the hotend and heatbed to 100, but when i have ...

Hello, in my basement i have the printer connected to my server with usb connection, and the repetier host 1.6.1 is running on the server. but it is to cold and to noisy in my basement with the server and all other equipment there.
Is it possible for me to run a repetier client on my macbook and ...

thank you did some reading at the bed and there are a lot to learn