Geeetech

I have levelled and levelled. I have done it with things cold. I have done it while it was hot. For me to get ANYTHING to stick, I have to use the blue tape method and even then, still have to wipe down with alcohol. Now what I am beating around the bush is I can ONLY print to the front 1/3 of the ...

I'm guessing I would have to change the hot end and the nozzle to a 3.0?

Sorry to hear. My condolences.

That's what I have....

vert wrote: Sun Mar 03, 2019 5:34 am I use 90% isopropanol alcohol to clean the bed on my geeetech printers.

Hope your dad is better or gets better.
Fred

Sorry I have taken a bit to reply but My Dad is in a coma so I havent been on here.

Steve.

After a few prints now, the bed has started 'gumming' up. Is this normal. I have cleaned it with alcohol cooled and hot and it doesn't seem to come off. Can I use a harsher liquid like acetone or does it even matter. I have finally started getting the feel of getting the bed adjusted. I have had to ...

Thank you for the reply here and in my filament question. I have found so many .stl files I want to print, but just haven't found the right place says you do this and then this and etc..... I have to find a book 3D Printing for dummies (like me) :D
I'm still setting up CURA and the drivers so at ...

I am as dumb as they come when it comes to this technology. I have had my A10M maybe a week so forgive me.

Printing from the card is one thing. I read that it is easier to print straight from the computer. So getting the software and drivers is no big deal. However, since I haven't done it yet, it ...

Ok. I have a very, very, Very dumb question. Aside from the obvious size, what is the difference between 1.75mm and 3.0mm filament? Quality? Larger prints?

I have/had issues with using the binder clips. My unit came with the clips installed. I leveled my bed several times. Used the lizard as my first test print. One thing a 2 color print does is to use a 'trash' area to clear the nozzle. Guess where that ended up being? Right on top of one of the ...