Geeetech

Hello all :)

i was playing around with our A10M and the possibilities of the mixing extruder lately. This included testing some gradients (see my Geeetech A10M Gradient Test Towers for reference). Up to this point i thought it's a pity that you have to choose between printing a gradient OR two ...

_kaktus_ wrote: Sun Jan 27, 2019 1:52 amI really like your answer

I'll do my very best, but i'm merely sharing my experience, though.

Cheers

Try ...


... diluted water soluble (!) wood glue (Ponal for example). 1 part glue, 2 parts water. Also no joke and working great on our Creality Ender3 with a mirror tile. The main advantage is that you can more easily apply a very thin layer that "straightens" itself due to being liquid after ...

Hi,

there are two culprits with Cura's default settings and the first layer.

The first one is the fan speed which is set to full speed right from the start. Since we set an initial fan speed of 0 and full speed at 1 mm, our adhesion issues were greatly reduced.

The second one is the first layer ...

Hi,

we had a similar problem and solved it by uninstalling Cura *and* deleting user related folders on the computer which produced unexpected results.

It seems the issue was caused by some setting we made visible, changed and reverted back to invisible. I had the impression that Cura doesn't ...

Hi,

in my opinion the pictures show pretty clearly that the extrusion is too low. You might check the following parameters first:

* In the slicer (Cura Slic3er, Repetier... whatever you use), check if there is a flow setting set to something below 100%
* Also check if the slicer is set to 1.75 mm ...