Geeetech

Thank you so much for your explanation, Steve!
I tried this mixer software and now avoid Repetier completely. I see no reason to use it anymore and do everything in Cura now. Works great for me.
Cheers!

Solved my layer shifting problem by repacing both the X- and Y axes stepper motors with S42B closed-loop stepper motors (and installed a smoother on both axes while I was at it). Never seen any shifted layer anymore.
Cheers!

Hi Tryonn,
I am fairly new to this 3D printing stuff. For modelling I use the free version of Fusion 360. You could import your .STL file there, get rid of the hole for the axes first and then make a new hole in the correct diameter.

Hope this works for you?

Cheers!

Hi all,

Right from the beginning I seem to have some trouble with the homing position of my Geeetech A30T.
It came with an already broken air nozzle, and now I cannot find an air nozzle that fits this model of A30T (I bought it in the end of 2020).
Every model I tried to print so far is too short ...

Hhmmm.... Noone?
Is there someone out there actually using Repetier software??

Hi,
Look for A10M Fan Duct on Thingiverse, like this one:
https://www.thingiverse.com/thing:3452266
There are a couple out there that work for the A30T, but not all of them. Some are too short and will melt.
Cheers!

Hi all,

After some trouble with my A30T I now managed to get some decent prints from it, using Repetier Host.
I only cannot figure out how to choose which extruder (color/filament) I want to print with when only print 1 object (1 group).
The "workaround" I found is to print at least 2 objects. Then ...

Hi,
Seems I'm lucky I ordered the 3D Touch and magnetic bed separately from some other vendor on eBay.
But you're right. Support was not very helpful (so far).
In the end managed to solve the problem myself by first downgrade the firmware and after that upgrade again.
Seems to me the factory reset ...

Hi all,

I'm fairly new to this 3D printing!

Last Saturday I received my new and shiny Geeetech A30T printer.
After putting everything together I also installed a 3D touch sensor and gave the printer a try.
My first "project" was a new fan duct which came out (not great but) very nice and the fan ...