Geeetech A10M and TMC2208 Drivers

[Nylus]

Hello, I would like someone to help me knowing how to replace the actual drivers of the motherboard for the tmc2208m which I heard they are a lot more quiet. Pls, I really need help from someone

[William]

Hi, You need to replace it when you turn off the printer.
Pay attention to the direction in which the drive board is installed.
It is necessary to change the direction of motor operation.
You can refer to this: https://www.youtube.com/watch?v=5Tn3-f-QTI0
I hope this can help you.

[Nylus]

Hi, You need to replace it when you turn off the printer.
Pay attention to the direction in which the drive board is installed.
It is necessary to change the direction of motor operation.
You can refer to this: https://www.youtube.com/watch?v=5Tn3-f-QTI0
I hope this can help you.

Okay, really thanked, but I don´t know German. So it's compatible this drivers with the motherboard, right?
And how can I change the direction of the motor operation?
Thanks a lot for answering, and sorry for my ignorance

[William]

Change the direction of the motor in the firmware,
You can change the firmware by referring to the method in the video.
I hope this can help you.

[Nylus]

From where can I buy this drivers? Would you be so kind to leave a link or something? Thanks!

[William]

Hi, You can contact your sales for consultation or search online.

[Nylus]

Hi, You can contact your sales for consultation or search online.

Do I need to change something on the Marlin Software? Or is not necessary? I just need to plug in and check the V, right?

[Admin]

Yes, you have to change it on the marlin firmware.
You can refer to:https://www.youtube.com/watch?v=5Tn3-f- ... cqq_aiomsg