GeeeTech Color Mixing Software does not change the G Code

[William]

Hi,Jorgie
1. I set the thickness is the 0.4mm with no top layer

2. When I import the gcode from Cura,it shows 60K lines(Vase mode won't show layers but show lines)

3.If you don't want to upload the gcode or any pic.
Then we can't refer to it and we can't give you more help.

Kindly

[Jorgie]

Ok, here is the output G code.

[William]

Thanks!I will check it when I get up.

[Jorgie]

Hi William,
What did you find?

[William]

Today I have the time for a test.
Will let you know later.

[Jorgie]

Hi William,
Do you have an update? While not an urgent issue, it would be nice to have an answer as to why it worked for you but not me.
Sean

[William]

Hi,
I've fixed it.
I tried to replaced the "G0 Z0.15" to "G1 Z0.15 F400" then it worked.
You can refer to it:

Fixed.png (232.99 KiB) Viewed 23744 times

[Jorgie]

Hi William,
So you have analysed the G code and fixed it. BUT that means the GeeeTech Color Mixing Software is faulty. Correct? LOL

[William]

Completely correct！
It is a bug of the color-mixer.
I will talk it with the author.
Thx for your feedback!

[k20human]

Hi,

I have same problem with Color Mixer 1.1
I slice the STL with Cura 4.3

Please find GCODE in attachment

This is the orignal model : https://www.thingiverse.com/thing:2431575/files (slime)

I try others STL, sometimes it works, sometime not

Thanks