Power supplies may not provide enough power. And that's why it happens.
Temperature problems
Re: Temperature problems
Hi.
Power supplies may not provide enough power. And that's why it happens.
Power supplies may not provide enough power. And that's why it happens.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Temperature problems
I have installed a 480W PSU. The voltage is stable now. But the problem is the same!
Actually the printer is heating up for more than 30 minutes and does not complete heating!
I disassembled and reassembled the complete hotend, checked every cable and connector, measured the resistances of every single part.
Everything seems to be ok. So where is the problem?
In my view this is not a kit, its an experiment!
Actually the printer is heating up for more than 30 minutes and does not complete heating!
I disassembled and reassembled the complete hotend, checked every cable and connector, measured the resistances of every single part.
Everything seems to be ok. So where is the problem?
In my view this is not a kit, its an experiment!
Re: Temperature problems
Could you check your PSU output is 24V or not?
If it is the 24V then you should check the mosfet with the multimeter.
If it is the 24V then you should check the mosfet with the multimeter.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!