Page 2 of 19
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Wed Nov 16, 2016 1:28 am
by Ru77y
Yes, original Geeetech Pro B Acryl, default metal parts (Z and Extruder).
Strange, with your 14. Nov. version also the bed temp. wont go over 50°C.
With the default FW (
http://www.geeetech.com/forum/viewtopic ... 20&t=17046) (GT2560), I have no problems.
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Wed Nov 16, 2016 1:31 am
by NiklasO
Cleared EEPROM? (send M502 followed by M500).
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Wed Nov 16, 2016 2:06 am
by UndCon
I also suspect EEPROM issues.
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Wed Nov 16, 2016 4:50 pm
by Ru77y
Ok, I send M502 and M500
and with with this Conf optimizations (original Geeetech Conf):
Code: Select all
//#define PIDTEMPBED
#define INVERT_X_DIR false
#define X_MIN_POS -10
//#define AUTO_BED_LEVELING_BILINEAR
//#define Z_SAFE_HOMING
//#define EEPROM_CHITCHAT
my test File 1 (Z, 10mm) has a high of 9,50mm and File 2 (XY, 2mm high) has a high of 1,22mm.
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Fri Nov 18, 2016 7:38 pm
by Ru77y
Now, i use this version:
https://github.com/galorin/Marlin/tree/ ... evelopment
its RC7 but with GT2560 Board specs and it runs great!
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Fri Nov 18, 2016 8:18 pm
by NiklasO
Edited, see first post
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Fri Nov 18, 2016 9:09 pm
by NiklasO
Edited, see first post
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Sun Nov 20, 2016 10:35 pm
by Ru77y
Now, the new RCBugfix with your conf, the 10mm z-Test-file has a high of 9,5mm...
I dont get it
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Mon Nov 21, 2016 12:33 am
by NiklasO
Ru77y wrote:Now, the new RCBugfix with your conf, the 10mm z-Test-file has a high of 9,5mm...
I dont get it
That's really strange. Check power to steppers maybe? Grasping at straws here...
I haven't received my digital caliper yet (will arrive within a week) so I can only do some crude measurements and it seems spot on here.
The changes made from the github.com repo works great for me. The bed temperature is rock solid and keeping set temp spot on for the full print. PID temp for the bed is great!
Re: Latest Marlin RCBugFix branch for PI3 Pro B
Posted: Mon Nov 21, 2016 11:01 pm
by Ru77y
epic fail
I took the 21. Nov. version of RCbugfix and read every line of the conf twice.
every time I forget to disable "#define BLTOUCH"
Sorry
... Testfile is printing and looks good