Re: How to install the firmware for GT2560
Posted: Fri Dec 30, 2016 6:04 pm
I've noticed that. Why can not I open a file of the same law? I wonder what am I doing wrong? Difficult for me;)
Pekka
Geeetech
Here you can share you great ideas about hardware innovation. Here you can enjoy more professional and specialized services, Here is a platform for you to make a difference!
https://forum.geeetech.com/
How to install the firmware for GT2560
Page 6 of 15
Re: How to install the firmware for GT2560
Posted: Fri Dec 30, 2016 7:08 pm
I got it to work !! Now we just have to continue from where I started the motor reversible. Many thanks
Pekka
Pekka
Re: How to install the firmware for GT2560
Posted: Wed Jan 04, 2017 1:17 am
How long should the upload take? I Have a brand new Geeetech Prusa i3 pro B, and have followed these instructions, but the Arduino software seems to be freezing on the upload (now going on 10 minutes). I have previously communicated and printed via Repetier, so I know com is OK. I'm on Linux/Ubuntu 14.04, using Arduino 1.0.5.
Thanks for your help.
Thanks for your help.
Re: How to install the firmware for GT2560
Posted: Wed Jan 04, 2017 5:49 pm
Generally the procedure takes 2-3 mins on Windows.Alandac wrote:How long should the upload take? I Have a brand new Geeetech Prusa i3 pro B, and have followed these instructions, but the Arduino software seems to be freezing on the upload (now going on 10 minutes). I have previously communicated and printed via Repetier, so I know com is OK. I'm on Linux/Ubuntu 14.04, using Arduino 1.0.5.
Thanks for your help.
Re: How to install the firmware for GT2560
Posted: Wed Jan 04, 2017 6:12 pm
Thanks Bang,
I did resolve the problem. The RepetierHost V1.6.0 was interfering with the communication between the Arduino IDE and the printer. I just closed the RepetierHost program, restarted the computer and the printer doing to a reset and then the upload took less than a minute.
Greetings and Happy new Year to all of you.
I did resolve the problem. The RepetierHost V1.6.0 was interfering with the communication between the Arduino IDE and the printer. I just closed the RepetierHost program, restarted the computer and the printer doing to a reset and then the upload took less than a minute.
Greetings and Happy new Year to all of you.
Re: How to install the firmware for GT2560
Posted: Thu Jan 05, 2017 11:32 am
Congratulations and happy new year
Re: How to install the firmware for GT2560
Posted: Thu Jan 12, 2017 10:54 pm
hello every body
I am a new user
axes mvts are wrong
I try to put a good firmware for Prusa I3 pro B
with Arduino when I try to transfer, I have this msg on Arduino
"error msg"
Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\Jacques\Documents\Imprimante 3D\I3_pro_X\I3_pro_X\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
"
Can someone help me
Thanks
Pat
I am a new user
axes mvts are wrong
I try to put a good firmware for Prusa I3 pro B
with Arduino when I try to transfer, I have this msg on Arduino
"error msg"
Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\Jacques\Documents\Imprimante 3D\I3_pro_X\I3_pro_X\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
"
Can someone help me
Thanks
Pat
Re: How to install the firmware for GT2560
Posted: Fri Jan 13, 2017 5:42 pm
Hi,Patpat51 wrote:hello every body
I am a new user
axes mvts are wrong
I try to put a good firmware for Prusa I3 pro B
with Arduino when I try to transfer, I have this msg on Arduino
"error msg"
Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\Jacques\Documents\Imprimante 3D\I3_pro_X\I3_pro_X\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
"
Can someone help me
Thanks
Pat
So did you try Arduino 1.0.1?
Re: How to install the firmware for GT2560
Posted: Fri Jan 13, 2017 10:04 pm
Hello Bangbang wrote:Hi,Patpat51 wrote:hello every body
I am a new user
axes mvts are wrong
I try to put a good firmware for Prusa I3 pro B
with Arduino when I try to transfer, I have this msg on Arduino
"error msg"
Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\Jacques\Documents\Imprimante 3D\I3_pro_X\I3_pro_X\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
"
Can someone help me
Thanks
Pat
So did you try Arduino 1.0.1?
At the first, I have taken Arduino 1.8.1 still go to download 1.01 and see
Re: How to install the firmware for GT2560
Posted: Sat Jan 14, 2017 1:07 am
Re Hello bangbang wrote:Hi,Patpat51 wrote:hello every body
I am a new user
axes mvts are wrong
I try to put a good firmware for Prusa I3 pro B
with Arduino when I try to transfer, I have this msg on Arduino
"error msg"
Arduino : 1.8.1 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\Jacques\Documents\Imprimante 3D\I3_pro_X\I3_pro_X\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
"
Can someone help me
Thanks
Pat
So did you try Arduino 1.0.1?
first I reinstall Arduino versus 1.01 as you said and no error msg as before
I take I3_pro_X firmware on the forum and then put inside with Arduino 1.01
no error msg
then launch "auto home"
but just X motor goes to it good position
during this mouvement I saw Y motor giving a little smal mvt and Z equal juste move a little
I tryed another firmware named Marlin-PI3_Pro_B and same result
just good mvt motor axe X , a very little mvt of Y and Z.....
In lcd screen, when you try manual mvt, something may be strange just see axe X an Y???? Is it normal???
regards
pat