mini2440 WinCE 6.0 image corruption
Posted: Tue Nov 11, 2014 8:20 pm
We bought 15 pieces of mini2440 boards and later we discovered that all of them have ether problems with uploading winCE image(CRC errors), write/read_back to/from NAND memory via ActiveSync program (unable to read files from mini to PC) or WinCE image corruption after shutdown/restart procedure. The board losses IP and other custmized settings.. it looks like it restart into factory default state..
First, we thought it was only 64bit win7 usb driver problem, but after trying also from winXP, situation was the same. The nboot.bin and nk.bin are the same as we used before.
What surprises me is really high number of (new!) boards unable to be flashed properly. I somehow suspect bad quality of NAND memory in whole latest production series because it didn't happen before in last two years with same type of board.
Please help !!!
Best regards,
Borut
First, we thought it was only 64bit win7 usb driver problem, but after trying also from winXP, situation was the same. The nboot.bin and nk.bin are the same as we used before.
What surprises me is really high number of (new!) boards unable to be flashed properly. I somehow suspect bad quality of NAND memory in whole latest production series because it didn't happen before in last two years with same type of board.
Please help !!!
Best regards,
Borut