Page 1 of 1
No motors moving
Posted: Thu Jan 22, 2015 3:11 am
by Monica
I have a Mendel Max 1.5+ running on marlin with a Rambo V1.2. The extruder is heating up and all fuses are fine but none of my motors are moving, that is, (x,y,z and extruder). I have absolutely no idea what could be going on! Please help.
Re: No motors moving
Posted: Thu Jan 22, 2015 12:00 pm
by john
Hi Monica,
Move all axis on a middle position when the machine is power off. and then turn it on, select "Auto Home" from the LCD menu.
Let me know what happen after doing that.
Re: No motors moving
Posted: Thu Jan 22, 2015 7:42 pm
by Monica
Thank you for the fast reply
. I actually don't have an LCD I use pronterface.
Re: No motors moving
Posted: Fri Jan 23, 2015 9:12 am
by john
Our pleasure!
Please check all the endstops include their cables. If it doesn't work, show us some photo about your product.
Re: No motors moving
Posted: Wed Jan 28, 2015 9:56 am
by Monica
So I got the motors to work! I had an issue with the firmware! Thank you guys
Re: No motors moving
Posted: Wed Jan 28, 2015 11:37 am
by john
My pleasure!