z-axis only 1 on 2 step motro working
Posted: Wed Mar 25, 2015 12:20 pm
i just finnish assembling my geeetech i3 and every thing work fine exept one of the 2 step motor controling the z-axis is not working at all
Geeetech
Here you can share you great ideas about hardware innovation. Here you can enjoy more professional and specialized services, Here is a platform for you to make a difference!
https://forum.geeetech.com/
z-axis only 1 on 2 step motro working
Page 1 of 1
Re: z-axis only 1 on 2 step motro working
Posted: Wed Mar 25, 2015 2:16 pm
Did you connect another z motor to mainboard?
Re: z-axis only 1 on 2 step motro working
Posted: Wed Mar 25, 2015 2:35 pm
i follow the manual you give me and connect it like this
http://www.geeetech.com/wiki/index.php/ ... _pic86.png
http://www.geeetech.com/wiki/index.php/ ... _pic86.png
Re: z-axis only 1 on 2 step motro working
Posted: Wed Mar 25, 2015 2:45 pm
As you can see in the picture, there is still another connector for z motor(above the 3rd A4988) , but you need the extend the z motor wire with a 4 pins Dupont.
- QQ截图20150325144149.png (262.27 KiB) Viewed 6852 times
Re: z-axis only 1 on 2 step motro working
Posted: Wed Mar 25, 2015 2:50 pm
i think i know my mistake i plug the second z-axis motor on the e-axis but now i think the e-axis is for the motor of the extruder and if im right i just have to switch it