MK8 Extruder fan re-positioned, heatsink missed
Posted: Tue Apr 28, 2015 3:33 am
Hi there,
Today I received Me Creator and noticed that the extruder's fan and heatsink are missing from it's front.
The fan was found behind the extruder attached with plastic wire ties, with no heatsink.
I can reattach it to front, but I'm wondering if that was made on purpose.
Today I received Me Creator and noticed that the extruder's fan and heatsink are missing from it's front.
The fan was found behind the extruder attached with plastic wire ties, with no heatsink.
I can reattach it to front, but I'm wondering if that was made on purpose.