Dual Extruder Reprap 3D Printer Prusa I3 - Final Details
Posted: Fri Aug 14, 2015 4:09 am
Almost finishing to assembly the printer. I have some details:
1) There is an interference for the free movement of the nozzles with the clips installed to hold the cristal in the front and in the back, so this reduce the printing space. Mostly the clips installed in the back since it reduce about 5cm of the print area ->
2) Is there any instruction of how to level the nozzles? Is it necessary to dissasembly the printer head?
3) Is there any way to know the nozzle size? In the nozzle it is written "2-0" as shown in the picture above.
1) There is an interference for the free movement of the nozzles with the clips installed to hold the cristal in the front and in the back, so this reduce the printing space. Mostly the clips installed in the back since it reduce about 5cm of the print area ->
- interference with clip in the back of the extrudder
- P1110651r.JPG (227.1 KiB) Viewed 4062 times
- P1110646r.JPG (81.43 KiB) Viewed 4062 times
2) Is there any instruction of how to level the nozzles? Is it necessary to dissasembly the printer head?
- P1110657r.JPG (229.44 KiB) Viewed 4062 times
3) Is there any way to know the nozzle size? In the nozzle it is written "2-0" as shown in the picture above.