Geeetech

Posted: **Mon Jan 18, 2016 11:23 am**

isnt the print bed supposed to be UNDER the extruder when you hit the home button?

Posted: **Tue Jan 19, 2016 4:19 pm**

yeah the nozzle should be about 0.5mm above the bed after homing. You need to adjust the bolt which used to trigger the Z axis endstop to calibrate the distance between them:

: QQ截图20160119161852.jpg (192.17 KiB) Viewed 3471 times

Geeetech

print bed

print bed

Re: print bed