Geeetech

Hi there,

My G2 Pro is giving good quality prints (layer evenness, repeatability and adhesion is all good) but the size of prints is slightly out. Whist for some objects this is okay for other objects such as enclosures the contents won't fit correctly.

Specifically the Z axis is approximately 1% under-size (not such a problem) but the X and Y axes of printed parts are 3% oversize (too large and a significant problem on most prints). Are there any slicer settings or settings in the firmware that can correct this?

(I am thinking maybe actually measuring the size of the diagonal rods and adjusting the settings in the firmware may help but wonder if there's a simpler way)

Best Regards,
Steve.

Hello CrozTech,

Excuse me, I use Google Translator to translate the text of the forum in French, because I'm not bilingual. Thank you for your understanding and indulgence! This is William Kwok, a forum moderator suggests me to proceed in this manner.

Is that your problem is now solved?

If so, how have you solved the problem?

If not, what are your needs and expectations?

I bought a 3D printer Geeetech Rostock 301 (waiting to receive it) and I am informed about it. The suite is in French to reduce inconsistencies multiple translations ...

The friend René

--------------------------------------------------------------------------------

Bonjour CrozTech,

Excusez-moi, j'utilise Google Translator pour traduire les textes du forum en français, car je ne suis pas bilingue. Merci pour votre compréhension et votre indulgence ! C'est William Kwok, un modérateur du forum qui me suggère de procéder de cette manière.

Est-ce que votre problème est maintenant réglé ?

Si oui, comment avez-vous réglé le problème ?

Sinon, quels sont vos besoins ou attentes ?

J'ai acheté une imprimante 3D Geeetech Rostock 301 (en attente de la recevoir) et je m'informe à son sujet. La suite est en français pour réduire les incohérences des traductions multiples...

L'ami René