temperature buse
Posted: Mon Jan 09, 2017 6:51 pm
Hello
I have variations in the temperature of the nozzle.
Set temperature = 195 it varies from 170 to 220. after the setpoint temperature on the screen indicates 0. therefore the printer but in temperature alarm and this cut. Help me please. For info I can only use the ecran lcd the connection pc not walk.
thank you in advance
lulu
I have variations in the temperature of the nozzle.
Set temperature = 195 it varies from 170 to 220. after the setpoint temperature on the screen indicates 0. therefore the printer but in temperature alarm and this cut. Help me please. For info I can only use the ecran lcd the connection pc not walk.
thank you in advance
lulu