Page 1 of 1
RepRAp smartcontroller problem LCD204
Posted: Thu Apr 06, 2017 7:15 am
by Bober
Hi Guys!
Display showing me just start page. When i push the selector it does not opening menu.
Re: RepRAp smartcontroller problem LCD204
Posted: Thu Apr 06, 2017 3:17 pm
by William
Hi,as to the MINTEMP error,you can check this post to vertify:
viewtopic.php?f=23&t=17030.
Re: RepRAp smartcontroller problem LCD204
Posted: Fri Apr 07, 2017 6:44 am
by Bober
Thank you! But MINTEMP is not problem for now. Somebody can help me? Everithing is good. Libraries in fine. Firmware is right.
Re: RepRAp smartcontroller problem LCD204
Posted: Fri Apr 07, 2017 8:45 am
by William
Hi,in your case,there maybe some bad connection between the LCD and board.Please double check it.
If it still don't work,could you make your problem into a video in order to help you better?Please as much detail as possible.
Re: RepRAp smartcontroller problem LCD204
Posted: Sat Apr 08, 2017 7:47 am
by Bober
I checked it with three different sets (panels and wires). Now i think problem is in my board.
You can see video by link (sorry i tried to upload video on site, but it never happened)
https://youtu.be/JjYgsRfWGHg