Page 1 of 1
ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Fri Mar 23, 2012 7:32 pm
by damrock
Hi,
i have purchased the "Arduino Compatible 3.2'' TFT LCD module with SD card".
Now i'm trying to use it but it doesn't works....
I have connected the shield as described in your guide and uploaded the first demo on the arduino board.
The upload goes well but i get only a white screen and no image/text.
So, i have tried with the third demo ( because the second has some code problem ) but nothing is changed... Only white screen
Now, please let me know what is going wrong...
I think that is doa.
P.s. i have used 3 different arduinos and i get the same problem
Thanks in advance
Damiano
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Wed Mar 28, 2012 10:33 am
by jack
Hi there;
Sorry for late, this type of 3.2'' TFT lCD is only compatible with Arduino Mega2560, Please use mega2560 to see if it works well
regards,
Jack
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Wed Mar 28, 2012 5:39 pm
by damrock
ok, I tried right now with the Mega2560 but nothing has changed.
I have connected the display as described in your document reference at this link: "
http://www.geeetech.com/tft-32-with-sd- ... p-388.html"
Could you please send me the right diagram for the connections and code to test?
thanks a lot
Damiano
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Thu Mar 29, 2012 7:18 pm
by jack
Hi there;
I'm afriad to tell you that I've tested the 3.5" TFT LCD with connection diagram and code, with which there is something indeed.For replacing it, An updated TFT LCD with shield is almost ready to launch,we will send you for free.
best regards;
Jack
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Fri Mar 30, 2012 6:39 am
by damrock
thanks a lot for your answer.
I'm happy to receive the updated version
please keep me informed.
Thanks in advance
Damiano
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Thu Apr 12, 2012 2:11 pm
by techsupport
Hi friend,
HY-TFT320 3.2”TFT LCD with touch screen and SD card is compatible with Arduino, please visit
http://www.geeetech.com/2012/04/interfa ... o-arduino/ and follow the instruction.
Regards,
Techsupport team
Re: ONLY BLANK SCREEN on Arduino Compatible 3.2'' TFT LCD
Posted: Sun Apr 22, 2012 6:36 am
by damrock
jack wrote:Hi there;
I'm afriad to tell you that I've tested the 3.5" TFT LCD with connection diagram and code, with which there is something indeed.For replacing it, An updated TFT LCD with shield is almost ready to launch,we will send you for free.
best regards;
Jack
Hi jack, my friend!
Did you have some news about "
An updated TFT LCD with shield is almost ready to launch,we will send you for free
"?
for onesty i have to say that i have tested the display as suggested by "techsupport" , and seems working fine ( just some white lines during the image changes... )
please keep me informed.
Many thanks
Damiano