Page 1 of 1
Extruder feed temperamental
Posted: Wed Jul 24, 2019 8:33 am
by Chub
Why does the feed extruder up at the filament only move when it wants to. Same setting, same file and it doesn't feed material. Stop print, auto home, try again and it feeds. Drives me crazy.
Re: Extruder feed temperamental
Posted: Wed Jul 24, 2019 8:44 am
by Chub
Now that it turned on I get this:. Is this under extrusion problem or e steps or bed to far from nozzle? Print is sticking great to bed. I have first layer set to 120%
Re: Extruder feed temperamental
Posted: Wed Jul 24, 2019 9:50 am
by William
Hi, It looks like your hotbed is some distance from the nozzle.
1. You need to level the hotbed;
2. Do not print too fast, you can refer to the printing speed; 30-60mm / s.
I hope this can help you.