Page 1 of 1

Geeetech A30 Pro Problems

Posted: Thu Apr 02, 2020 4:38 am
by Riccardo
Hello guys,
I wanted to ask you if you could help me solve the problems I'm having with the new A30 Pro that has just arrived:


1 The PSU fan always runs at maximum speed and makes an unbearable noise

2 The touch screen has hair inside and does not respond very well to commands

3 Do you have a Simplify or Cura profile?

Thanks in advance and sorry for my english translated by Google;)

Re: Geeetech A30 Pro Problems

Posted: Thu Apr 02, 2020 9:32 am
by William
Hi, 1.psu fan is always on when the printer is on,
Need to be cooled
2. Can you provide a picture of the screen, I will give feedback;
3. now no configured
thanks for your feedback.

Re: Geeetech A30 Pro Problems

Posted: Thu Apr 02, 2020 10:09 pm
by Riccardo
I have another Eryone Thinker S printer, the power supply fan is always on, but it does not increase exponentially and unbearably when the hob is heated, it always remains silent. Seeing the noise tests on the site of the A30 pro I thought it was silent and instead because of the fans under the plate it is very noisy. That's why I thought there was an adjustment.

La foto la manderĂ² via mail.
Grazie

Re: Geeetech A30 Pro Problems

Posted: Sat May 23, 2020 3:25 am
by ricbru
If you want to get creative, there are fans that are more silent due to better blade designs. In a Creality 10S PRO I mounted a couple smaller silent additional fans and the PS fan no longer even needs to come on. The A30 Pro will be my first Geeetech model so I will need to look. I am a retired Electrical Engineer for GM and will share later.