Geeetech A20M TEMPT TOO LOW
Posted: Fri Dec 17, 2021 5:55 pm
Hey guys!
I'm very new to 3d printing. I assembled my new printer yesterday and did a test print (sample came with SD card) and everything was fine, result was imho very impressive (pics attached)
Now,when printing my first self-made model the printer suddenly stops with a warning "TEMP TOO LOW". Nozzle cools down from 200°C and thats it.
My settings are: PLA from Geeetech, bed temp 60°C, nozzle temp 200°C.
Has anyone an idea whats wrong here? Room temp is fine, just as yesterday.
Cheers.https://19216801.onl/ https://routerlogin.uno/
I'm very new to 3d printing. I assembled my new printer yesterday and did a test print (sample came with SD card) and everything was fine, result was imho very impressive (pics attached)
Now,when printing my first self-made model the printer suddenly stops with a warning "TEMP TOO LOW". Nozzle cools down from 200°C and thats it.
My settings are: PLA from Geeetech, bed temp 60°C, nozzle temp 200°C.
Has anyone an idea whats wrong here? Room temp is fine, just as yesterday.
Cheers.https://19216801.onl/ https://routerlogin.uno/