Geeetech

Dear friend,

If there is an error: Arduino.h:No such file or directory. That is because Arduino IDE lacks indispensable file:Arduino.h
(Location of Arduino.h: Hardware / sanguino / cores/ arduino / arduino.h).
1. Please re-download "Sanguino" file, and make sure it has been put into the "Hardware ...

Dear friend,

The position of zero of printer denpends on setting of firmware, limit-switch's location(max of min), and the connection of motor.
Before printing , the position of zero of Me Creator extruder locates at the top-left-corner of the machine, where the limit-switch locates.
The default ...

Dear friend,

The firmware of machine has been burned, please try the following methods to solve your problem:
1. Replace a USB wire
2. Check whether the connection of Z-axis motor is normal
3. Swap the A4988 module of X or Y axis and the A4988 module of Z-axis, then check whether Z-axis is in ...

Dear friend,

When appears error“avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51”, the general reason are wrong selection of mother board type and COM port.
if they are correct, please try to reburn Bootloader:
1.Make sure that ISP ...

Dear friend,

If you want to reset the step of Extruder, you need to modify the corresping parameters in the firmware. then reload it to the mother board。
（The last parameter：#define DEFAULT_AXIS_STEPS_PER_UNIT {}）

Best regards!

Dear friend,

The firmware of printer has been burned, so we do not recommend reburning yourself. Because that does not necessarily help to solve your problems.
What mother board is on your machine? Can you decribe your trouble more detailedly, so that we can provide a better solution.

Best regards!

Dear friend,

1. Before downloading the program, please disconnect all the devices.
2. Connect the board to the PC, when detects Com port, choose correct Com port in Arduino IDE.
3. Please download" Sanguino Patch for Windows" at: http://www.geeetech.com/wiki/index.php/Azteeg . And put the ...

Dear friend,

Sorry for delaying your valuable time. If you have the tools, you can try to re-welded those pins. Our cutomer service have already contacted you and gave you solution, please kindly check you email account.

Have a nice day!

Dear friend,

we usually burn bootloader by USBASP。you can refer this link , where there is the method of burning by Arduino uno：
http://arduino.cc/en/Tutorial/ArduinoISP#.Uy2_QfldW_s
http://www.arduino.cc/en/Tutorial/ArduinoToBreadboard

Best regards!

Dear friend,
I am sorry for your trouble, but could you please send the pictures again, because i cannot see them,Thanks!

Best regards!