I had the same issue. Assuming your Z axis lead screws are straight, the issue may be clearance tension. Here's how I solved the issue:
1. Disconnect the drive screws from the z motor. rotate the screws in counterclockwise motion to see if you can move them by hand. If not, you will have to check ...
Search found 2 matches
- Wed Apr 19, 2017 7:12 am
- Forum: Assembly
- Topic: Z axe is not moving proper on my M201
- Replies: 4
- Views: 29568
- Tue Apr 18, 2017 12:08 pm
- Forum: Feedback&Suggestion
- Topic: M201 with GTM32 Pro board Z stop error
- Replies: 1
- Views: 5473
M201 with GTM32 Pro board Z stop error
Having difficulty homing my M201 because the Z axis stop doesn't seem to work. It keeps pressing into the bed and grinding the motors. It's getting voltage on the kill switch, I've upload the latest firmware for the board V1.0.03(for the Pro board), and I've tried offsetting the Z axis in the ...