Geeetech

Where do we go to get support from geeetech if we need a board replacement? I was trying to look on their site but couldn’t find a place to contact them for replecement

If I do (2) 12v fans on one 24v circuit would I need any additional hardware to step the voltage down? My fans are noisy and gettting louder the more I use my A10M. I need to look into better fans for the hot end. Does anyone have the specs on the stock fans (cfm, rpm, ect)?

For sticking issues, it depends on filament. I have Amazon PLA and it does not stick well. I can get it to stick without any adhesive support, but I have to turn the temp of the nozzle up to 225-235 degrees and the bed to 80 degrees (it may warp print though). I have really good lunch with a glue ...

Yes I read the A10M has a M7 nozzle. I was just wondering if anyone ordered any 3rd party M7 nozzles and tried them. I was thinking of ordering some spares or possibly stainless steel nozzles so I was curious.

Thanks for the quick response. Anyone order from amazon that could suggest a good upgraded nozzle?


i bought these for my a10
https://www.amazon.com/gp/product/B07KBWSWSM
https://www.amazon.com/gp/product/B07BPNK8KS
on my a10m i just garbed my dremel and drilled out the stock one to 1.75mm lol ...

Thanks for the quick response. Anyone order from amazon that could suggest a good upgraded nozzle?

Has anyone ordered replacement tips to verify what fits correctly besides the Geeetech ones?

Idk if it will help but try removing the SD card and pressing the reset button. I noticed every time I powered off and back on I was getting that screen, but only when the SD card was inserted. I started using a brand name as SD card and no longer have the issue

Are there plans to make the 3dwifi module work with EasyPrint for windows? I want to be able to send my gcode files directly to print or at least copy them to the sd card wirelessly.

Thanks for the feedback. After tightening the screw and running the test again I am getting .002-.004 after 5 tests.


Update: After a bit I would get borough failed errors so I have to back the screw out a little more. I am getting .07 to .1 now. I am going to mess with it a little more, what do ...